南澳電氣NATRQ鉗形接地電阻測試儀是南澳電氣公司研發團隊對技術品質的追求，通過不斷創新完善，對老款產品的徹底升級。廣泛應用于電力、電信、氣象、油田、建筑及工業電氣設備等的接地電阻測量、回路電阻測量。

 南澳電氣（武漢）有限公司（簡稱“南澳電氣”)，是國電網武漢高壓研究所改制后成立的高電壓輸變電檢測設備的高新骨干企業，主要從事電力儀器儀表、交直流分壓器、互感器類測試設備、高壓耐壓設備、峰值電壓表、超聲局放定位系統、工頻信號發生器、沖擊電壓電流發生器 、變壓器類試驗設備、繼電保護測試儀、SF6及開關類檢測設備、局部放電超聲檢測系統、避雷器測試設備、環境人工氣候模擬實驗裝置、電能表校驗設備、蓄電池檢測儀等產品的研發。

NATRQ Clamp-On Ground Resistance Tester     南澳電氣NATRQ鉗形接地電阻測試儀

產品簡介 

南澳電氣NATRQ鉗形接地電阻測試儀是南澳電氣公司研發團隊對技術品質的追求，通過不斷創新完善，對老款產品的徹底升級。廣泛應用于電力、電信、氣象、油田、建筑及工業電氣設備等的接地電阻測量、回路電阻測量。在測量有回路的接地系統時，不需斷開接地引下線，不需輔助電，安全快速。能測量出用傳統方法無法測量的接地故障，能應用于傳統方法無法測量的場合，因為NATRQ鉗形接地電阻測試儀測量的是接地體電阻和接地引線電阻的綜合值。

南澳電氣NATRQ鉗形接地電阻測試儀有長鉗口及圓鉗口之分，長鉗口特別適宜于扁鋼接地的場合。NATRQ鉗形接地電阻測試儀還能測量接地系統的泄漏電流和中性線電流。

南澳電氣NATRQ鉗形接地電阻測試儀產品別名

單鉗口接地電阻測試儀，鉗形接地電阻測試儀，鉗型接地電阻儀，鉗型接地電阻表，鉗形接地電阻儀，鉗形接地電阻表，接地電阻，接地表，地阻儀，接地電阻儀，接地電阻測量儀，鉗式數字接地電阻測試儀，鉗式接地電阻測試儀

南澳電氣NATRQ鉗形接地電阻測試儀產品特性 

1、適用于各種形狀的接地引線(園鋼、扁鋼及角鋼)

2、非接觸式測量接地電阻、安全、快速

3、不必使用輔助接地棒，不須中斷待測設備之接地

4、NATRQ鉗形接地電阻測試儀具有雙重保護緣

5、抗干擾性強，測量度高

6、使用5號堿性電池方便用戶

Product introduction 

NATRQ Clamp-On Ground Resistance Tester is a major technological breakthrough in traditional grounding resistance measurement. It is widely used in the grounding resistance measurement of electric power, telecommunications, meteorology, oilfield, construction and the industrial and electrical equipment.

NATRQ series Ground Clamp Meter, in the measurement of a grounding system with loop current, does not require disconnecting the grounding wire, and need no auxiliary electrode. It is safe, fast and simple to use.

NATRQ series Ground Clamp Meter can measure out the faults beyond the reach of the traditional methods, and can be applied in the occasions not in the range of the traditional methods. NATRQ series Earth Ground Clamp Meter can measure the integrated value of the grounding body resistance and the grounding lead resistance.

NATRQ series Ground Clamp Meter are equipped with either a long clamp or a round clamp, as indicated in the figure below. A long clamp is particularly suitable for the occasion of grounding with the flat steel.

In addition, NATRQC Earth Ground Clamp Meter is also able to measure the leakage current and the neutral current in the grounding system.

Also called name

Ground resistance tester, ground clamp meter, ground clamp resistance tester

The Characteristics of the products

1. Applies to all kinds of ground lead. (round bar, flat bar, angle iron)

2. non-contact measured resistance, safe ,fast.

3. need not use assistant ground rod.

4. with double protecting insulation.

5. with strong anti-interference ability and high accuracy.

6. use dry batteries, convenient use for customers.

 

本頁產品地址：http://www.vn-obr.cn/sell/show-7381816.html